The Most Talked About Topic on social media is Cannabis Oil
Making a Batch of Cannabis 0il – Search Videos
Step-by-Step Process:
- Prepare the Cannabis: Break down the dried cannabis into smaller pieces and place them in a deep bowl.
- Add Solvent: Pour enough solvent to completely cover the cannabis.
- Stir and Crush: Use a wooden spoon to stir and crush the cannabis, allowing the solvent to dissolve the active compounds.
- Strain the Mixture: Pour the solvent-cannabis mixture through a cheesecloth or coffee filter into another container to separate the plant material from the liquid.
- Repeat: Repeat the solvent wash process with the remaining plant material to extract as much oil as possible.
- Evaporate the Solvent: Pour the strained solvent-oil mixture into a rice cooker. Turn on the rice cooker and set it to high heat. Use a large fan to help evaporate the solvent safely. Ensure proper ventilation.
- Collect the Oil: Once most of the solvent has evaporated and the mixture has thickened, transfer the remaining oil into a stainless steel measuring cup.
- Final Heating: Place the measuring cup in a pot of hot water to gently evaporate any remaining solvent.
- Store the Oil: Use syringes to collect and store the final product.
- This makes it easy to measure and dispense the RSO.
Safety Tips:
- Always work in a well-ventilated area.
- Avoid open flames as the solvents are highly flammable.
- Use protective gear to avoid skin contact with the solvent.
By following these steps, you can make high-quality Rick Simpson Oil at home. For those looking to buy RSO oil for sale, ensure you purchase from reputable sources to guarantee the product’s quality and safety. https://rsoforsale.org/
https://us.fullscript.com/welcome/mpergola.
Pharmaceutical grade supplements, sign up to order from my FullScript store!
Commit to your health in 2025 and always!! Happy to help you choose what you need.
I’m still curious about what plant parts and solvent you use for extraction?
Chuck Malan I use ground up flowers and trim after harvesting seeds. I’ve already answered your question about solvent. 99% Isopropyl alcohol is the best solvent for me. Ethanol is inferior. It gets 25% less yield and about 10% less potency.
Peter O’Toole Do you drink isopropyl alcohol?
Jim Gerencser the FDA allows up to 500 ppm in our soda pops.
My oil has less than 1 ppm left in it.
Let me know if you have anything intelligent to offer or inquire about.
I have lots of different strains I use and for the solvent I use Everclear.
Substitutes For Everclear (For Homemade Extracts) – CookeryBase
190 Proof Denatured Alcohol3A is a high-purity solvent known for its fast evaporation and drying ability. It is a blend of ethanol and methanol, making it unsuitable for consumption or medical use but ideal for industrial and laboratory applications.This is the best strain list for various types of cancer but if your taste buds don’t agree you won’t follow through.
Purple Kush: A 100% Indica strain known for its high THC levels (up to 27%), making it ideal for pain relief and deep sedation.
ACDC: A high-CBD strain that offers therapeutic benefits without strong psychoactive effects, making it suitable for those seeking relief without intoxication.
Granddaddy Purple: This strain is famous for its relaxing effects and high THC content, providing significant pain relief and helping with insomnia.
Girl Scout Cookies: A hybrid strain that combines both Indica and Sativa effects, known for its euphoric high and pain-relieving properties.
Cannatonic: A balanced hybrid strain with a high CBD content, Cannatonic is often used for its calming effects and ability to alleviate pain and inflammation.
Which Cannabis ratio offers best cancer kill and how to achieve it without wasting weed – Search
Above are the cannabinoid content of the oil.
It consists of several cannabinoid contents such as THC. CBD. CBG.
How to make Rick Simpson Oil – Search Videos
How to Make Rick Simpson Oil (RSO) at Home.
Simpson used isopropyl alcohol. – Search
Making Rick Simpson Oil (RSO) involves a specific extraction process to ensure the oil’s potency and purity.
Here is a search-friendly summary of the recipe process for creating RSO: – Search
The Big Debate: Which Solvent to use for cannabis oil extraction – Search
Ultimate Guide to Cannabis Solvents: How & Why They Differ | Grower IQ
Solventless Cannabis Extraction: What Are The Options? | Yō Dabba Dabba
WHAT KIND OF SOLVENTS SHOULD I USE?
There are also many other solvents which could probably be used to perform an extraction effectively such as acetone, but the only solvents that I have direct experience with are ether, naphtha and 99% isopropyl alcohol, therefore I do not feel qualified to tell the public what other solvents they can use.
The process I am about to describe involves washing the starting material twice with a good solvent such as pure light aliphatic naphtha or 99% isopropyl alcohol etc. To effectively remove the available resin, which contains the medicinal cannabinoids from the plant material.
Light naphtha has proven itself to be a very effective solvent to produce this oil and it is also quite cheap to purchase when compared to the cost of other solvents. This solvent is called light naphtha in Canada, and in Europe it is often called benzin(e) and it is sold as cleaning fluid or solvent in many hardware stores.
In addition, naphtha is usually quite easy to locate in many countries, while other pure solvents that are well suited to preform extractions, can be very expensive and hard to find. Naphtha comes in different forms and under many different names and the temperatures at which they boil can vary a great deal, which is something that must be taken into consideration if one is to obtain the proper solvent. The naphtha which I preferred to use had a boiling point around 70 degrees C, which is about the same amount of heat required to bring 99% isopropyl alcohol to its boiling point.
Any solvent that you intend to use should be colorless, the same as water and if you dip your finger into it, within about 40 seconds it should completely evaporate from your finger leaving no oily residue behind.
Naphtha is sold under many names but if you go to a fuel supplier, you should not have too much trouble tracking some down, if you tell the supplier that you are looking for a solvent which has a boiling point around 70 degrees C. Light naphtha has many industrial uses, and it is often used to degrease engine parts or thin paints etc., so I’m sure you should not have too much trouble finding what you need.
Just to give you an idea of its many uses, naphtha is the same substance used to fuel Coleman lamps and stoves. Unfortunately, rust inhibitors are added to Coleman fuel.
So, I do not recommend that this fuel be used to produce oil. But as I understand it, some companies actually do supply camping fuel with no additives, so this should work very well as a solvent to perform an oil extraction.
There is also medical-grade naphtha (hexane) – Search is available in many countries in the world, but it is a bit more expensive and usually harder to get and I have not found any significant difference between pure light naphtha and the medical grade version of this solvent.
- Never use a rice cooker… there is an internal spark…and it will explode… the rice cooker is the reason we can’t use anything flammable to make oil in Canada…the reason people blew themselves up…
- FACT. Electrohome essential oil distiller… Green oil machine…tabletop alcohol distiller…a closed loop system…VENTILATION MOST IMPORTANT THING FOR SAFTEY ..no boom when using alcohol!
**Most Popular Solvent for Extracting Cannabis is Everclear.**
FAQ about RSO « Phoenix Tears | Rick Simpson
RSO Recipe
Ingredients and Materials Needed:
- 1 pound of dried cannabis (preferably indica strain)
- 2 gallons of solvent (99% isopropyl alcohol, ethanol, or naphtha)
- Deep bowl
- Wooden spoon
- Cheesecloth or coffee filter
- Rice cooker
- Large fan
- Stainless steel measuring cup
- Syringes for storage
Peter O’Toole
That’s about 900 ml 30.45 oz. of Real Cannabis Oil or RCO.
It’s about 10 lbs. I pulled 6 per oz on this run.
And how much does that cost?? $20 per ml
Some People State if I knew it would have been that expensive, I would have never tried cannabis. I believe for the newbies to start out low on THC and build up your tolerance.
Many quit because they can’t handle the high before achieving the cancer kill.
Stay legendary and believe you can beat this!!!
Dr. Michele Ross: A personal story about weed and fibromyalgia
Stimulating the happiness molecule: the cure for depression?
Jack Kungel Cleared His Bladder Cancer with C.Oil – Search
https://weedmaps.com/dispensaries/in/united-states
female doctor that made cannabis oil – Search
Cannabis Oil Success Stories | Facebook